FPV 3 Axis Brushless Gimbal Frame W/ 2204 2805 Motors for Walkera X350

FPV 3 Axis Brushless Gimbal Frame W/ 2204 2805 Motors for Walkera X350
  • Продавецarizonacardinalsvsdetroitlions.us
  • Список ценUS $34.99piece
  • Продажная ценаUS $34.99piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,1 (832)

Oписание продукта


Item Description

Simple structure and light weight,CNC aluminum alloy structure
Brushless motor direct drive
With anti-vibration rubber balls,easy to adjust
Compatible with Gopro 4 , 3; sj4000 ; xiaomi xiaoyi camera
with 2pcs 2208 motors and BGC3.12 gimbal controller,sensor
with motor protector which can help heat dissipation
Question 1:
Why the gimbal shaking so much after power supply?
1:When receive the gimbal, first install the camera, then supply the power, otherwise the gimbal will shake if not install the camera. 
2:The gimal can only load the camera, becausethe gimbal has requirement to the weight, if equipped with a light camera , it will also shake, because it is too light.
3: If the cable bind the gimbal , the motor will also shake, pls let the cable far away from the gimbal. 
Question 2:
The Gimal cannot work after supply the power?
1: pls insert the sensor again, the sensor may be loose during transportation. Just INSERT once again
Question 3:
Why the gimbal board  burned?
1: the current is too large, the breakdown of the IC module,pls use batteriy of low Amperage。
Question 4:
What voltages can be used of the gimbal?
1:we proposed using 12V(3S battery)
Note : (very important )    
1. The camera must fixed in the head (without any loosening )       
2 Adjust the camera to the left or right so that the camra is at Horiziontal Level  
3 Before camera fixed in the gimbal , please do not supply power to the board
4 .the parameters on the  gimbal is for gopro 3 4 , sj4000 or xiaoyi camera , if you use other camera , it may not fit or you may need to change the parameters .
Package included:
1 x Aluminum gimbal installed 2 motors
1 x Gimbal controller
1 x Sensor Wiring
1 x belt for camera
2 x servo cables
Note: 1. there is a black and blue camera belt for the gimbal because of the different production batch, send the color at random.
         2. You can use Gopro, sj4000 , xiaomi Xiaoyi camera; If you use the gopro hero session  and runcam 3 camera, the belt is not suitable , you need to think a way to fix the camera on the gimbal.
        3. The camera must be tighten by the blet, otherwise the gimbal maybe show a issue or did not work.
     4. If gimbal has any issue when you use it,do not revise or change or do anything to the gimbal, just contact with me, can can give you best guide, thanks.
Item Pictures
2 axis gimbal (5)2 axis gimbal (4)